carrozzieri-italiani.com

The ultimate italian coachbuilder site

Category Winner
1
  • 2024 Pebble Beach

Momo Mirage

The Momo Mirage designed by Pietro Frua.

Vehicle Overview

The Momo Mirage was a US sports car produced in small numbers in the early 1970s and marketed as the Momo. The originators of the project were American businessman Peter Kalikow and New York Jaguar dealer Alfredo Momo. In 1967, Kalikow, who had long been considered a car enthusiast, decided to develop his own vehicle. The reason for this was allegedly the presentation of the Aston Martin DBS, with whose handling Kalikow was said to have disagreed. The aim was to create a Gran Turismo that would fill the gap between a Rolls-Royce and a Ferrari: spirited, elegant and conservative. From a technical point of view, solid American mass-produced components were to be used, while the chassis and body design were to feature Italian references. Alfredo Momo made some contacts here. The Momo Mirage was developed in Italy. Kalikow and Momo initially commissioned Giulio Alfieri, the former Maserati chief engineer, to develop the chassis, but he was unable to complete the work in the allotted time. Ultimately, the job was given to Stanguellini, a small race car designer from Modena. Vittorio Stanguellini developed a massive platform chassis on which numerous foreign components were installed: The front suspension was taken from the Jaguar Mark 2, the steering came from Alford & Alder, the dampers from Koni and the brakes from Girling. The engine used was a Chevrolet LT-1 5.7-liter eight-cylinder, which had recently been used in the Chevrolet Corvette and was also found in some European hybrids, notably the Iso Rivolta cars. Kalikow wanted to replace the factory carburetor system with a Lucas fuel injection system; however, this plan was ultimately not realized. Power was to be transmitted via a manual five-speed transmission from ZF; alternatively, a GM automatic was planned. The car’s design was to exude European elegance and was to be developed by an Italian designer. It was clear early on that the car was to be a two-door, four-seat coupe. After some casual and ultimately fruitless inquiries with Giovanni Michelotti, Pininfarina and Ghia, more serious discussions developed in the fall of 1970 with Pietro Frua, which ultimately included the order to produce the body. The first 1:1 model was completed by Frua in early 1971. It was a rectilinear coupe with a long hood and large grille framed by round twin headlamps. In many ways it was an evolution of the Lancia Marica, a coupe that Tom Tjaarda had designed for Carrozzeria Ghia in 1969. In particular, the line of the C-pillar, which started immediately at the rear upper door frame and then dropped off in a straight line, corresponded to the model two years older. Peter Kalikow later claimed that the design had not been developed – or not solely – by Frua; rather, a designer named Gene Garfinkel, an employee at Raymond Loewy’s studios, had done the work largely on his own. The first prototype, a maroon coupe with a carbureted engine and manual transmission, was completed during 1971. It was first presented in Italy and also used for test drives before being transferred to the United States in December 1971. Another prototype, painted blue, was produced in early 1972 with a modified axle ratio. The plan was to start series production in the course of 1972; Kalikow was thinking of an initial production of 12 vehicles. Stanguellini was to manufacture the chassis, and Pietro Frua was responsible for the hand-building of the vehicle. Stanguellini produced nine chassis by the fall of 1972, at least six of which (including the prototypes) were dressed by Frua. In the fall of 1972, Kalikow and Momo pulled the emergency brake. The reason for this was exploding costs. Both Stanguellini and Frua had doubled their price expectations compared to the initial agreements: Stanguellini now demanded $8,000 for each chassis, and Frua charged a manufacturing price of $7,000 per vehicle. Added to this was the cost of the engines, which had to be purchased regularly through American Chevrolet dealers. This meant that Kalikow’s plan to offer the Momo Mirage at a unit price of about $12,000 – and thus cheaper than contemporary Ferraris – was no longer feasible. In addition, production in Italy had been repeatedly disrupted by numerous strikes. Ultimately, Kalikow had lost half a million dollars on the project. To prevent the losses from becoming even greater, he ended the adventure at short notice. A total of six Momo Mirage were originally produced, three of which are now in Kalikow’s possession.

momo mirage

Technical Specifications

  • Body
  • Year
    1972
  • Make
    Momo
  • Model
    Mirage
  • Coachbuilder
    Frua
  • Length (mm)
    N/A
  • Width (mm)
    N/A
  • Height (mm)
    N/A
  • Units built
    6
  • Engine Type
    V8
  • Designer
    Pietro Frua
  • Make
    N/A
  • Model
    N/A
  • Cylinder Capacity
    N/A
  • Number Of Doors
    N/A
  • Six Month Rate
    N/A
  • Twelve Month Rate
    N/A
  • Date Of First Registration
    N/A
  • Year Of Manufacture
    N/A
  • CO2 Emissions
    N/A
  • Fuel Type
    N/A
  • Tax Status
    N/A
  • Transmission
    N/A
  • Colour
    N/A
  • Type Approval
    N/A
  • Wheel Plan
    N/A
  • Revenue Weight
    N/A
  • Tax Details
    N/A
  • Mot Details
    N/A
  • Taxed
    N/A
  • mot
    N/A
  • Make
    N/A
  • Cylinder Capacity
    N/A
  • Registration
    N/A
  • Year Of Manufacture
    N/A
  • CO2 Missions
    N/A
  • Fuel Type
    N/A
  • Tax Status
    N/A
  • Colour
    N/A
  • Type Approval
    N/A
  • Wheel Plan
    N/A
  • Revenue Weight
    N/A

Events

Related Persons

2 1 vote
Article Rating
Subscribe
Notify of
0 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments