www.carrozzieri-italiani.com

The ultimate italian coachbuilder site

A Closer Look27 October 2024 by Andreas 108 Viewed

The Ferrari Berlinetta Boxer: Pininfarina’s Iconic Departure

Photo courtesy of Auto Storica

The Ferrari Berlinetta Boxer (BB), produced from 1973 to 1984, stands as one of Ferrari’s most radical shifts in design and engineering, thanks to the collaborative work with Pininfarina. The BB was Ferrari’s first mid-engine road car, marking a significant departure from Enzo Ferrari’s long-standing preference for front-engine designs. Its introduction signified a new chapter for Ferrari, aligning more closely with the trends set by other supercar manufacturers at the time.

Origins and Design Inspiration

Designed under the direction of Leonardo Fioravanti, the Ferrari 365 GT4 BB (the first iteration of the BB series) debuted at the 1971 Turin Auto Show, and production began in 1973. One fascinating anecdote about the car is that its “BB” initials reportedly stood for Brigitte Bardot, the famous French actress, which was a codename used during development and remained with the model​.

The BB’s design was sleek and revolutionary. It featured a wedge-shaped, low-profile body, which became a staple of 1970s supercar aesthetics. One of its unique design elements was the bicolored bodywork, with a black lower section that visually slimmed the car while emphasizing its elongated shape. Its pop-up headlights and minimalist, flowing lines were indicative of Pininfarina’s ability to combine functionality with elegance, helping the car stand out from its competitors​.

Mid-Engine Innovation

Before the BB series, Ferrari had always adhered to front-engine layouts for its road cars, famously stating, “Never put the cart before the horse.” However, the mid-engine layout, which Ferrari had already used in its Dino models, became necessary as rivals like Lamborghini began popularizing the mid-engine format in supercars.

The 512 BB (introduced in 1976) featured a 5.0-liter flat-12 engine, mounted in the middle of the car, right behind the driver, delivering 360 horsepower. While this engine was commonly referred to as a “Boxer,” it was technically a 180-degree V12, not a true Boxer engine. In a true Boxer engine, opposing pistons move in opposite directions, but in the 512 BB, they moved simultaneously in the same direction​ This flat configuration allowed for a lower center of gravity, which significantly improved the car’s handling.

Performance and Engineering Marvels

The 512 BB was more than just a stylish car—it was a high-performance machine capable of a top speed of 302 km/h (187 mph) and accelerating from 0 to 100 km/h in just 5.4 seconds. The car’s engineering wasn’t just limited to its engine. It featured independent suspension on all four wheels and a sophisticated five-speed manual transmission mounted below the engine, showcasing Ferrari’s commitment to performance.

Over the years, the BB saw several iterations. The BB 512i, introduced in the early 1980s, swapped the carburetors for Bosch K-Jetronic fuel injection, which lowered emissions and improved fuel efficiency without sacrificing too much power. Although the power dropped slightly to 340 hp, it remained one of the fastest road cars of its era​.

Legacy and Influence

The BB series laid the groundwork for Ferrari’s later mid-engine supercars, such as the Ferrari Testarossa, which succeeded the BB 512i in 1984. It also marked a significant shift for Ferrari, transitioning from the era of front-engine grand tourers to mid-engine supercars.

Today, the Ferrari Berlinetta Boxer remains a prized collector’s item. Its combination of cutting-edge design by Pininfarina, revolutionary mid-engine layout, and Ferrari’s racing heritage makes it one of the most iconic cars in the brand’s history. With only 387 units produced of the original 365 GT4 BB and slightly more of the later 512 BB and BB 512i, its rarest Ferrari status further solidifies its place in the pantheon of classic supercars.

The Ferrari BB, both for its groundbreaking design and engineering, represents one of Ferrari’s most influential models. Its innovations in the mid-engine supercar market, coupled with Pininfarina’s masterful styling, continue to captivate enthusiasts and collectors to this day.

Which Ferrari model is your favorite? Let us know in the comments!

the author

Andreas

Italian classic car enthusiast with German roots. Renowned as a respected figure in the classic car community, he serves as a jury member at various international concours d'elegance, including the Classic Gala Schwetzingen and Mantova. As a content creator, Andreas passionately shares his profound knowledge and appreciation for vintage automobiles. His heart beats for cars designed by Giovanni Michelotti, showcasing his discerning taste and dedication to preserving the timeless elegance of automotive history.

Posts You Might Like

A Closer Look 6 March 2024

The Bertone B.A.T. mobiles

The B.A.T., were commissioned by Nuccio Bertone who commissioned the designer, Franco Scaglione, to create concept cars based on the Alfa Romeo 1900C chassis with bodywork capable of surprising the public with the idea of making cars with the lowest possible aerodynamic coefficient.

0 Comments 579 Viewed
5 1 vote
Article Rating
Subscribe
Notify of
0 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments

The BMW M1 holds a unique place in automotive history. As the first production car from BMW’s Motorsport division, the M1 was intended to showcase the company’s engineering prowess and racing pedigree. However, despite its striking looks, impressive performance, and significant impact on the BMW brand, the M1’s journey was fraught with challenges, including financial turmoil, production delays, and regulatory hurdles. Today, the M division has evolved into a symbol of high-performance street cars, but the M1’s legacy remains one of both triumph and failure.

The Birth of BMW Motorsport

In 1972, BMW established its Motorsport Division, known as “M,” with the goal of advancing the brand’s competitive edge in the world of motorsports. Prior to this, BMW’s racing efforts were fragmented, with various teams involved in different categories but lacking a unified structure. This all changed when Bob Lutz, BMW’s head of sales and marketing, spearheaded the formation of BMW Motorsport. The division’s primary mission was to build competitive race cars and elevate the brand’s reputation, particularly in touring car racing.

BMW’s first major success in the motorsport arena came in 1973 with the BMW 3.0 CSL, which dominated the European Touring Car Championship. This victory cemented BMW’s position in the racing world. However, as the division grew, it became apparent that creating race cars from existing production models was unsustainable in the long run. The company needed a purpose-built race car, one that would push the boundaries of performance. This vision led to the creation of the BMW M1, a car that would become a defining symbol for BMW Motorsport.

Michelotti and the BMW Turbo Concept

Alongside the creation of the M division, BMW was developing the BMW Turbo, a concept car that would become a landmark in automotive design and technology. Designed by Paul Bracq, the Turbo E25 introduced bold new features, such as a mid-mounted engine, gullwing doors, and retractable headlights, marking a radical departure from BMW’s previous designs. The car represented a vision of the future, combining performance with cutting-edge safety features, and was intended as a technology showcase for the brand.

Initially, BMW contracted Carrozzeria Michelotti, to assemble the Turbo prototype. Giovanni Michelotti, famous for his work with a variety of automotive brands, established a 10,000-square-meter workshop dedicated to the Turbo project. Michelotti built two BMW Turbo prototypes in total, with one being showcased at the 1972 Frankfurt Motor Show. This partnership underscored BMW’s ambition for the car and its desire to create something truly revolutionary.

However, the timing of the project was unfortunate. The 1973 oil crisis caused a global economic downturn, dramatically increasing fuel prices and severely affecting the automotive industry, particularly for performance cars like the BMW Turbo. The crisis placed enormous financial strain on car manufacturers, and BMW was forced to reconsider its plans, including the costly decision to move forward with the Turbo prototype.

The Fallout and the Shift to Italdesign

As the crisis deepened, BMW was unable to fulfill its contract with Michelotti, and the planned collaboration was put on hold. Financial constraints led the company to reevaluate its spending, and resources allocated to the Turbo project were reduced. Michelotti’s specially built workshop, which had been prepared to assemble the car, remained underutilized as BMW shifted its focus.

However, the end of the oil crisis opened up new possibilities. Italdesign, the renowned design and engineering firm led by Giorgetto Giugiaro, came to BMW’s aid. In the years following the crisis, Italdesign purchased Michelotti’s workshop, which would become the production base for the BMW M1. Giugiaro’s expertise in design and engineering played a pivotal role in transforming BMW’s ambitious race car project into a road-going reality.

Giugiaro’s task was to refine the BMW Turbo E25 concept into a production car that could both meet the demands of motorsport and appeal to the consumer market. His design for the M1 retained the sharp, angular lines and futuristic profile of the Turbo, but with refined proportions to suit both racing needs and road-going practicality. The M1’s mid-engine layout, wide stance, and low roofline emphasized its racing pedigree, while its aggressive, sleek design ensured it would stand out as a supercar.

A Race Car for the Road

The BMW M1 was originally conceived as a Group 5 race car, competing against purpose-built machines like the Porsche 935. The project aimed to blend motorsport engineering with production cars, creating a race-bred vehicle that could also be sold to the public. To achieve this, BMW enlisted Lamborghini, to help with the development of the M1. Despite Lamborghini’s expertise in high-performance road cars, it lacked experience in motorsport, which ultimately led to complications during the project.

In the early stages, Lamborghini was tasked with developing the chassis and body of the M1, while BMW would provide the engine. However, Lamborghini’s financial troubles soon became apparent. The company was experiencing significant cash flow issues, and it ultimately misappropriated funds intended for the M1 project. In a dramatic turn of events, BMW was forced to reclaim the project’s components and tooling from Lamborghini, a move that involved a late-night raid to retrieve the M1’s parts. This disruption delayed the project and ultimately led BMW to take full control of the M1’s development.

The Engineering Challenges

Despite the setbacks, the M1 took shape as a highly capable performance car. The vehicle was powered by the M88 engine, a 3.5-liter, straight-six unit that produced 277 horsepower in its road-going form. This engine, derived from the racing program, provided the M1 with impressive performance, allowing it to rival other supercars of the era, such as the Lamborghini Countach and Ferrari 512 BB.

The M1 featured a mid-engine layout, which contributed to its excellent handling characteristics. The car’s design was primarily focused on its racing capabilities, making it relatively raw and unrefined for a road car. It lacked amenities such as power steering, and the cockpit was cramped, with the steering wheel offset to the right to accommodate the center-mounted engine. Despite these compromises, the M1’s performance on the road was outstanding, with acceleration and handling that earned it widespread praise from automotive journalists.

The Racing Struggles and ProCar Series

One of the most significant challenges the M1 faced was its inability to compete in mainstream racing. To homologate the M1 for Group 5 racing, BMW needed to produce 400 road cars. However, production delays meant that only 200 units were built in the first two years, preventing the car from racing in most major events.

In response, BMW created the ProCar Series, a one-make racing championship exclusively for the M1. The ProCar Series was unique in that it featured Formula One drivers competing against privateer M1 owners, creating an exciting spectacle at Formula One race weekends. Although the series generated interest and the M1 proved competitive in this setting, it was not enough to elevate the car into mainstream motorsport. Furthermore, the M1’s performance in ProCar did little to resolve its commercial issues.

Commercial Challenges and Production Woes

The M1 was also a commercial disappointment. Originally, BMW had intended to sell the M1 for around 100,000 Deutsche Marks, placing it in direct competition with supercars like the Lamborghini Countach. However, due to the disruptions caused by Lamborghini’s financial troubles and the increased cost of production, the M1’s price climbed to 113,000 Deutsche Marks. Even with this increase, the car was difficult to sell. BMW was only able to produce 399 M1s, well below the original goal of 1,000 units, making it a rare and expensive model.

Despite its high performance and exotic status, the M1 was a hard sell. Its design was too closely aligned with its racing origins, and its lack of creature comforts and high price point made it less appealing to the typical supercar buyer. Additionally, the car’s raw nature, with its lack of power steering and awkward driving position, alienated many potential customers. In the end, the M1’s commercial failure contributed to its relatively low production numbers and limited legacy as a production car.

Legacy and the Evolution of the M Division

Although the M1 was a commercial and racing disappointment, it laid the foundation for the success of BMW’s Motorsport division. The lessons learned from the M1 project helped shape future BMW M cars, starting with the iconic E30 M3. The E30 M3, developed as a more practical and accessible performance car, became a massive success in both motorsport and sales, marking the beginning of a new era for BMW M.

The M1 also solidified the link between BMW’s racing heritage and its high-performance street cars. Today, the M badge is synonymous with powerful, driver-focused vehicles, but it all traces back to the M1. The M1’s legacy is less about its financial success and more about its role in shaping the identity of BMW M as a division dedicated to performance engineering and motorsport excellence.

Conclusion

The BMW M1’s story is one of ambition, innovation, and hard lessons learned. It was a car ahead of its time, a race car designed for the road, and a symbol of BMW’s commitment to motorsport. While it never reached the commercial success BMW had hoped for, it played a crucial role in the development of the M division and set the stage for future performance cars. The M1 may not have been the financial success BMW wanted, but its influence on the brand and its impact on the automotive world cannot be overstated. Today, the M1 remains a revered classic, a testament to BMW’s racing heritage and the trials and triumphs of the M division.

© 2025 Carrozzieri-italiani.com
Handcrafted with love in Italy 🇮🇹