carrozzieri-italiani.com

The ultimate italian coachbuilder site

News24 June 2024 by Andreas 147 Viewed

Bertone GB110: The Eco-Friendly Hypercar That Turns Waste into Fuel

Bertone has once again outdone itself with the new eco-friendly hypercar, the GB110. What’s special about it? The fuel is obtained by transforming plastic waste.

Every year, Top Marques Monaco manages to attract luxurious brands and models. The renowned event also showcased a new Italian hypercar, the Bertone GB110. Besides its stunning beauty, the hypercar has another remarkable feature that makes it highly intriguing: its ecological spirit. Yes, nowadays, hybrid and electric vehicles are a reality in the industry, but the approach to environmental respect takes a different form here.

From “bi” to Three-Dimensional

For almost two years, the project was the talk of the town following some detailed renderings. But transitioning from “bi” to three-dimensional is a vast leap. This is why enthusiasts were keen to see if the initially proclaimed qualities would hold up in reality. The company’s reputation, earned over years of distinguished service, suggested they would. After sadly going bankrupt in 2014, before rising from its ashes, the designers aimed to astonish visitors. Judging by the initial reactions, they succeeded.

On the occasion of the company’s 110th anniversary, the “stylists on four wheels” unveiled the GB110, and it must be said: it knows how to make an impression. The bodywork of the beast deviates from typical market clichés, and given the many expensive hypercars on sale, this already speaks volumes about its distinctive personality. The front exudes natural charisma with its narrow headlights and the thin extended section between the slightly raised lights above the hood, while the rear displays imposing strength.

Is the Engine from the Lamborghini Huracan? Clues Point to Yes

Previously, company spokespersons admitted to drawing inspiration from a pre-existing car, without specifying which one. We may have to live with this mystery, although the prevailing theory suggests it derives from the Lamborghini Huracan. This is implied by the “beating heart,” a ten-cylinder 5.2-liter engine augmented by a pair of turbochargers, capable of unleashing 1,100 HP and 1,100 Nm of peak torque.

The design team claims it can accelerate from 0 to 100 km/h in 2.79 seconds, from 0 to 200 km/h in 6.79 seconds, and reach 300 km/h from a standstill in just 14 seconds. The top speed exceeds 380 km/h. The exuberance is delivered through a seven-speed dual-clutch transmission to all four wheels.

Impressive numbers, but almost overshadowed by the unique fuel system. Instead of relying on traditional gasoline and diesel, the engineers opted for something truly original: plastic waste. In collaboration with Select Fuel, the company developed a patented technology to convert polycarbonate materials into fossil fuel. Speaking about what motivated Bertone to take on this challenge, CEO Jean-Frank stated, “We believe that tackling pollution requires diverse solutions employing various technologies. Plastic waste must be treated as a valuable resource. Through our partnership with Select Fuel, we transform waste into its original form.”

the author

Andreas

Italian classic car enthusiast with German roots. Renowned as a respected figure in the classic car community, he serves as a jury member at various international concours d'elegance, including the Classic Gala Schwetzingen and Mantova. As a content creator, Andreas passionately shares his profound knowledge and appreciation for vintage automobiles. His heart beats for cars designed by Giovanni Michelotti, showcasing his discerning taste and dedication to preserving the timeless elegance of automotive history.

Posts You Might Like

News 22 July 2024

The Bertone GB110 World Debut at Top Marques Monaco

The Bertone GB110 represents a bold new chapter in automotive excellence, unveiled with much fanfare at the Top Marques Monaco event. As Bertone’s first foray into the hypercar realm, the GB110 combines cutting-edge technology with unparalleled craftsmanship. Limited to just 33 units, each GB110 is a testament to the brand’s commitment to exclusivity and personalization. The vehicle’s sleek, aerodynamic design is complemented by a state-of-the-art twin-turbocharged 5.2L V10 engine, delivering a staggering 1,124 horsepower. This groundbreaking hypercar also boasts an innovative approach to sustainability, utilizing fuel derived from plastic waste. With its fusion of performance, elegance, and environmental consciousness, the GB110 marks a triumphant return for Bertone, celebrating over a century of automotive heritage while pushing the boundaries of modern engineering.

0 Comments 548 Viewed
0 0 votes
Article Rating
Subscribe
Notify of
0 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments

The BMW M1 holds a unique place in automotive history. As the first production car from BMW’s Motorsport division, the M1 was intended to showcase the company’s engineering prowess and racing pedigree. However, despite its striking looks, impressive performance, and significant impact on the BMW brand, the M1’s journey was fraught with challenges, including financial turmoil, production delays, and regulatory hurdles. Today, the M division has evolved into a symbol of high-performance street cars, but the M1’s legacy remains one of both triumph and failure.

The Birth of BMW Motorsport

In 1972, BMW established its Motorsport Division, known as “M,” with the goal of advancing the brand’s competitive edge in the world of motorsports. Prior to this, BMW’s racing efforts were fragmented, with various teams involved in different categories but lacking a unified structure. This all changed when Bob Lutz, BMW’s head of sales and marketing, spearheaded the formation of BMW Motorsport. The division’s primary mission was to build competitive race cars and elevate the brand’s reputation, particularly in touring car racing.

BMW’s first major success in the motorsport arena came in 1973 with the BMW 3.0 CSL, which dominated the European Touring Car Championship. This victory cemented BMW’s position in the racing world. However, as the division grew, it became apparent that creating race cars from existing production models was unsustainable in the long run. The company needed a purpose-built race car, one that would push the boundaries of performance. This vision led to the creation of the BMW M1, a car that would become a defining symbol for BMW Motorsport.

Michelotti and the BMW Turbo Concept

Alongside the creation of the M division, BMW was developing the BMW Turbo, a concept car that would become a landmark in automotive design and technology. Designed by Paul Bracq, the Turbo E25 introduced bold new features, such as a mid-mounted engine, gullwing doors, and retractable headlights, marking a radical departure from BMW’s previous designs. The car represented a vision of the future, combining performance with cutting-edge safety features, and was intended as a technology showcase for the brand.

Initially, BMW contracted Carrozzeria Michelotti, to assemble the Turbo prototype. Giovanni Michelotti, famous for his work with a variety of automotive brands, established a 10,000-square-meter workshop dedicated to the Turbo project. Michelotti built two BMW Turbo prototypes in total, with one being showcased at the 1972 Frankfurt Motor Show. This partnership underscored BMW’s ambition for the car and its desire to create something truly revolutionary.

However, the timing of the project was unfortunate. The 1973 oil crisis caused a global economic downturn, dramatically increasing fuel prices and severely affecting the automotive industry, particularly for performance cars like the BMW Turbo. The crisis placed enormous financial strain on car manufacturers, and BMW was forced to reconsider its plans, including the costly decision to move forward with the Turbo prototype.

The Fallout and the Shift to Italdesign

As the crisis deepened, BMW was unable to fulfill its contract with Michelotti, and the planned collaboration was put on hold. Financial constraints led the company to reevaluate its spending, and resources allocated to the Turbo project were reduced. Michelotti’s specially built workshop, which had been prepared to assemble the car, remained underutilized as BMW shifted its focus.

However, the end of the oil crisis opened up new possibilities. Italdesign, the renowned design and engineering firm led by Giorgetto Giugiaro, came to BMW’s aid. In the years following the crisis, Italdesign purchased Michelotti’s workshop, which would become the production base for the BMW M1. Giugiaro’s expertise in design and engineering played a pivotal role in transforming BMW’s ambitious race car project into a road-going reality.

Giugiaro’s task was to refine the BMW Turbo E25 concept into a production car that could both meet the demands of motorsport and appeal to the consumer market. His design for the M1 retained the sharp, angular lines and futuristic profile of the Turbo, but with refined proportions to suit both racing needs and road-going practicality. The M1’s mid-engine layout, wide stance, and low roofline emphasized its racing pedigree, while its aggressive, sleek design ensured it would stand out as a supercar.

A Race Car for the Road

The BMW M1 was originally conceived as a Group 5 race car, competing against purpose-built machines like the Porsche 935. The project aimed to blend motorsport engineering with production cars, creating a race-bred vehicle that could also be sold to the public. To achieve this, BMW enlisted Lamborghini, to help with the development of the M1. Despite Lamborghini’s expertise in high-performance road cars, it lacked experience in motorsport, which ultimately led to complications during the project.

In the early stages, Lamborghini was tasked with developing the chassis and body of the M1, while BMW would provide the engine. However, Lamborghini’s financial troubles soon became apparent. The company was experiencing significant cash flow issues, and it ultimately misappropriated funds intended for the M1 project. In a dramatic turn of events, BMW was forced to reclaim the project’s components and tooling from Lamborghini, a move that involved a late-night raid to retrieve the M1’s parts. This disruption delayed the project and ultimately led BMW to take full control of the M1’s development.

The Engineering Challenges

Despite the setbacks, the M1 took shape as a highly capable performance car. The vehicle was powered by the M88 engine, a 3.5-liter, straight-six unit that produced 277 horsepower in its road-going form. This engine, derived from the racing program, provided the M1 with impressive performance, allowing it to rival other supercars of the era, such as the Lamborghini Countach and Ferrari 512 BB.

The M1 featured a mid-engine layout, which contributed to its excellent handling characteristics. The car’s design was primarily focused on its racing capabilities, making it relatively raw and unrefined for a road car. It lacked amenities such as power steering, and the cockpit was cramped, with the steering wheel offset to the right to accommodate the center-mounted engine. Despite these compromises, the M1’s performance on the road was outstanding, with acceleration and handling that earned it widespread praise from automotive journalists.

The Racing Struggles and ProCar Series

One of the most significant challenges the M1 faced was its inability to compete in mainstream racing. To homologate the M1 for Group 5 racing, BMW needed to produce 400 road cars. However, production delays meant that only 200 units were built in the first two years, preventing the car from racing in most major events.

In response, BMW created the ProCar Series, a one-make racing championship exclusively for the M1. The ProCar Series was unique in that it featured Formula One drivers competing against privateer M1 owners, creating an exciting spectacle at Formula One race weekends. Although the series generated interest and the M1 proved competitive in this setting, it was not enough to elevate the car into mainstream motorsport. Furthermore, the M1’s performance in ProCar did little to resolve its commercial issues.

Commercial Challenges and Production Woes

The M1 was also a commercial disappointment. Originally, BMW had intended to sell the M1 for around 100,000 Deutsche Marks, placing it in direct competition with supercars like the Lamborghini Countach. However, due to the disruptions caused by Lamborghini’s financial troubles and the increased cost of production, the M1’s price climbed to 113,000 Deutsche Marks. Even with this increase, the car was difficult to sell. BMW was only able to produce 399 M1s, well below the original goal of 1,000 units, making it a rare and expensive model.

Despite its high performance and exotic status, the M1 was a hard sell. Its design was too closely aligned with its racing origins, and its lack of creature comforts and high price point made it less appealing to the typical supercar buyer. Additionally, the car’s raw nature, with its lack of power steering and awkward driving position, alienated many potential customers. In the end, the M1’s commercial failure contributed to its relatively low production numbers and limited legacy as a production car.

Legacy and the Evolution of the M Division

Although the M1 was a commercial and racing disappointment, it laid the foundation for the success of BMW’s Motorsport division. The lessons learned from the M1 project helped shape future BMW M cars, starting with the iconic E30 M3. The E30 M3, developed as a more practical and accessible performance car, became a massive success in both motorsport and sales, marking the beginning of a new era for BMW M.

The M1 also solidified the link between BMW’s racing heritage and its high-performance street cars. Today, the M badge is synonymous with powerful, driver-focused vehicles, but it all traces back to the M1. The M1’s legacy is less about its financial success and more about its role in shaping the identity of BMW M as a division dedicated to performance engineering and motorsport excellence.

Conclusion

The BMW M1’s story is one of ambition, innovation, and hard lessons learned. It was a car ahead of its time, a race car designed for the road, and a symbol of BMW’s commitment to motorsport. While it never reached the commercial success BMW had hoped for, it played a crucial role in the development of the M division and set the stage for future performance cars. The M1 may not have been the financial success BMW wanted, but its influence on the brand and its impact on the automotive world cannot be overstated. Today, the M1 remains a revered classic, a testament to BMW’s racing heritage and the trials and triumphs of the M division.

© 2025 Carrozzieri-italiani.com
Handcrafted with love in Italy 🇮🇹